Publications on COVID-19 by Air Handling Technology Association

09.12.2020
The document informs about the most important aspects to minimize the spread of COVID-19 through ventilation systems.
03.12.2020
Ralf Wagner has been Chief Technical Officer (CTO) of LTG Lufttechnische Gesellschaft since 2011 and is currently Deputy Chairman of the Research Association for Air and Drying Technology (FLT). He studied aerospace engineering with a focus on thermodynamics and aero engines and joined LTG in 1994. In an interview with Astrid Thieme-Medinger, the Chief Technical Officer and head of the development departments "Room Air Technology" and "Process Air Technology" answers current questions on the subject of air cleaners.
17.09.2020
A healthy indoor climate is a basic requirement for performance and motivated learning.
07.05.2020
Thomas Kroll is managing partner of GKS Klima-Service GmbH & Co KG and since 2015 chairman of the board of the VDMA Working Group Maintenance Building Technology (AIG). In an interview, the expert for hygiene and operational safety of ventilation and air-conditioning systems in hospitals, laboratories and healthcare facilities answers current questions in connection with the new VDMA information document "Ventilation and air-conditioning systems in times of COVID-19 - Recommendations for the healthcare sector".
05.05.2020
High demand for information requires expert knowledge. Second information document provides detailed information on subject of ventilation and air-conditioning systems in the healthcare sector.
21.04.2020
Dr. Henrik Badt, managing partner of Kalthoff Luftfilter und Filtermedien GmbH, is a member of the board of directors of the VDMA Air Handling Technology Association and chairman of the VDMA air filter working group. In an interview, this highly experienced chemical engineer, answers current questions on the VDMA information paper "Operation and Use of Ventilation Systems in Times of COVID-19" as well as questions on the subject of protective equipment and breathing masks.
03.04.2020
Information document on air handling systems in connection with COVID-19 Production of respiratory protection masks started.

News

12.01.2021
Due to the dynamic development of the supplier market for effective products, the VDMA overview of air purifiers with a separating or inactivating effect on viruses is regularly expanded. Thus, the previous list of suppliers of decentralized air purifiers has currently been supplemented by additional manufacturers.
15.12.2020
Flash survey: sales decline of 7 percent expected for 2020. Forecast: slight growth of 2 percent in the coming year.
11.12.2020
Election of Andreas von Thun's successor in early November. Building construction to become a stronger focus.
09.12.2020
The document informs about the most important aspects to minimize the spread of COVID-19 through ventilation systems.
03.12.2020
Ralf Wagner has been Chief Technical Officer (CTO) of LTG Lufttechnische Gesellschaft since 2011 and is currently Deputy Chairman of the Research Association for Air and Drying Technology (FLT). He studied aerospace engineering with a focus on thermodynamics and aero engines and joined LTG in 1994. In an interview with Astrid Thieme-Medinger, the Chief Technical Officer and head of the development departments "Room Air Technology" and "Process Air Technology" answers current questions on the subject of air cleaners.
19.11.2020
VDMA with joint stand and technical contributions on site
02.11.2020
Virtual event of the VDMA Refrigeration and Heat Pump Technology on energy efficiency of refrigeration systems with very good participant response.
22.10.2020
Joint appearance of member companies and VDMA association. Companies inform in Erfurt about filter and ventilation systems.
12.10.2020
The Chillventa eSpecial takes place from 13 to 15 October. On Thursday, 15 October from 14:00 hrs the VDMA will provide information on the 42nd BImSchV ((Ordinance on Evaporative Cooling Systems, Cooling Towers and Wet Separators).
06.10.2020
German Federal Institute for Occupational Safety and Health publishes "Focus on ventilation to protect against infection".
17.09.2020
A healthy indoor climate is a basic requirement for performance and motivated learning.
10.09.2020
On September 1st, the Executive Board of the VDMA Surface Technology unanimously elected Sebastian Merz as the new Chairman of the Board. He has been a member of the board since 2009 and will take over as chairman with immediate effect.
04.09.2020
Study on energy demand of refrigeration technology: New technologies are much more efficient.
31.08.2020
IFAT impact Business Summit brings the industry together from 8 - 10 September
27.08.2020
Gunther Müller is managing partner of Helios Ventilatoren GmbH + Co KG and a member of the VDMA industrial fans working group. In an interview the graduate engineer answers questions about the VDMA Directive relating to fans (2020-06) "ATEX Guideline Fans - Necessary steps to an operationally safe fan", which has been published by the Air Handling Technology Association.
31.07.2020
The trade fairs planned for October at the Stuttgart location cannot take place this year. Both trade fairs will then continue in the regular cycle.
28.07.2020
Main contents of the BREF document "Energy Efficiency" revised. New edition available in German.
24.06.2020
Against the background of the continuing corona pandemic and its effects on the world economy, NürnbergMesse has decided not to hold Chillventa 2020 in close cooperation with the exhibition advisory board, to which the VDMA Air Handling Technology Association also belongs.
18.06.2020
Companies expect weaker second half of the year. Building services engineering is particularly in focus. Consumers unsettled - technical information can help.
18.06.2020
New guide provides information on the application of the ATEX directive in relation to fans
29.05.2020
Following a revision, the current VDMA specification 24177:2020-05 " Powered smoke and heat control ventilators (Fans) for smoke extraction from buildings in the event of fire " is now available.
07.04.2020
On March 12th, the VDMA Symposium Fire Protection and Smoke Extraction took place at the Audi Forum in Neckarsulm. The focus was on the new Model Administrative Regulation Technical Building Regulations (MVV TB).
03.04.2020
Order intake clouds over in February. Effects of the corona virus require ongoing reassessment.
09.03.2020
VDMA Flow Viz has been specially developed for the mechanical engineering industry and is now available to VDMA member companies.
09.03.2020
VDMA Specification "Minimum requirements for a data sheet for refrigerated display cabinets" published. Information leaflet "Refrigerating appliances with a direct sales function, ecodesign requirements and energy labeling" presented at the EuroShop 2020 trade fair.

eurammon

26.11.2020
eurammon e.V. elected a new Executive Board during its virtual annual meeting in November 2020.
01.10.2020
Online award ceremony on 9 October. Winners will present their work.

Press Releases

Decline in sales in air handling technology kept within limits

Flash survey: sales decline of 7 percent expected for 2020. Forecast: slight growth of 2 percent in the coming year.

planen-bauen 4.0: Dr Thomas Schräder will represent the VDMA on the supervisory board in future

Election of Andreas von Thun's successor in early November. Building construction to become a stronger focus.

New edition " Ventilation and air conditioning systems in times of COVID-19”

The document informs about the most important aspects to minimize the spread of COVID-19 through ventilation systems.

Ventilation technology – Concepts for the safe handling of Corona

Joint appearance of member companies and VDMA association. Companies inform in Erfurt about filter and ventilation systems.

VDMA expert knowledge for Chillventa eSpecial 2020

The Chillventa eSpecial takes place from 13 to 15 October. The VDMA Refrigeration and Heat Pump Technology will take part in the virtual event and provide information on energy efficiency of refrigeration systems in technical presentation by leading experts.

Indoor climate in German schools requires action

A healthy indoor climate is a basic requirement for performance and motivated learning.

VDMA Surface Technology: Sebastian Merz is the new Chairman of the Executive Board

On September 1st, the Executive Board of the VDMA Surface Technology unanimously elected Sebastian Merz as the new Chairman of the Board. He has been a member of the board since 2009 and will take over as chairman with immediate effect.

Refrigeration technology helps to save energy

Study on energy demand of refrigeration technology: New technologies are much more efficient.

Fans explosion-proof and safe

Gunther Müller is managing partner of Helios Ventilatoren GmbH + Co KG and a member of the VDMA industrial fans working group. In an interview the graduate engineer answers questions about the VDMA Directive relating to fans (2020-06) "ATEX Guideline Fans - Necessary steps to an operationally safe fan", which has been published by the Air Handling Technology Association.

Draft VDMA specification 24247-7:2020-10

Draft of the VDMA Specification 24247-7 “Energy efficiency of refrigerating systems, Part 7: Control, energy management and efficient system management” published for comments. The revised version of the guideline is considered a set of rules for investors, planners and operators.

Information leaflet on the ATEX directive relating to fans published

New guide provides information on the application of the ATEX directive in relation to fans

Corona bears opportunities and difficulties for the Air Handling Technology

Companies expect weaker second half of the year. Building services engineering is particularly in focus. Consumers unsettled - technical information can help.

Revised specification VDMA 24177:2020-05

Following a revision, the current VDMA specification 24177:2020-05 " Powered smoke and heat control ventilators (Fans) for smoke extraction from buildings in the event of fire " is now available.

Information document "Ventilation and air conditioning systems in times of COVID-19 - Principles of operation and use"

The English edition is available for download.

Conversion of facilities in the healthcare sector: Measures required for the treatment of COVID-19

Thomas Kroll is managing partner of GKS Klima-Service GmbH & Co KG and since 2015 chairman of the board of the VDMA Working Group Maintenance Building Technology (AIG). In an interview, the expert for hygiene and operational safety of ventilation and air-conditioning systems in hospitals, laboratories and healthcare facilities answers current questions in connection with the new VDMA information document "Ventilation and air-conditioning systems in times of COVID-19 - Recommendations for the healthcare sector".

Ventilation and air conditioning in facilities of health care - Further information document with reference to COVID-19

High demand for information requires expert knowledge. Second information document provides detailed information on subject of ventilation and air-conditioning systems in the healthcare sector.

"Pooling expert knowledge to enable action strategies for users of indoor air and filter technology"

Dr. Henrik Badt, managing partner of Kalthoff Luftfilter und Filtermedien GmbH, is a member of the board of directors of the VDMA Air Handling Technology Association and chairman of the VDMA air filter working group. In an interview, this highly experienced chemical engineer, answers current questions on the VDMA information paper "Operation and Use of Ventilation Systems in Times of COVID-19" as well as questions on the subject of protective equipment and breathing masks.

Significant contribution in times of the corona crisis: companies in the general ventilation technology sector actively support

Information document on air handling systems in connection with COVID-19 Production of respiratory protection masks started.

Specialized Group Refrigerated Cabinets: Dialogue between retailers and manufacturers

VDMA Specification "Minimum requirements for a data sheet for refrigerated display cabinets" published. Information leaflet "Refrigerating appliances with a direct sales function, ecodesign requirements and energy labeling" presented at the EuroShop 2020 trade fair.

VDMA Fire protection and smoke extraction publishes information sheets

In addition to revising an existing publication, the Working group fire protection and smoke extraction has currently produced two new information sheets from the series "Safety in buildings and infrastructural facilities".

Networked production on focus

OPC UA is the core topic of VDMA Surface Technology at SurfaceTechnology GERMANY 2020. LABS conformity as a further focus: testing for paint wetting impairing substances according to the state of the art

First joint BIM dialogue for users and software manufacturers

New event format of the BIM clusters Hessen and Rhineland-Palatinate on 28 April in Mainz offers information exchange and knowledge transfer for BIM users and software vendors.

An overview of the entire spectrum of the industry: New edition of product directory "Fire protection and smoke extraction"

With view of the 6th VDMA Symposium “Fire Protection and Smoke Extraction” on 12 March in Neckarsulm, the current edition of the brochure will be published as online version.

VDMA: Executive Board of the Air-Handling Technology Association changes

FläktGroup and Kalthoff GmbH newly represented on the board.

VDMA joint stand at IFAT 2020: Efficient solutions for air pollution control and environmental technologies

Member companies from both VDMA specialist departments Air Pollution Control Technology and Waste Treatment and Recycling Technology will exhibit together for the first time from May 4th till May 8th, 2020 in hall B6, Munich Trade Fair Centre.

3rd Frankfurt BIM Symposium highlights the importance of the BIM planning method and underlines the importance of technical building services equipment

The components used in the construction of a building have a huge impact on future operating costs. A well-equipped building technology, a detailed planning method and highly qualified staff are essential.

New edition of the VDMA Air Filter Information "Overview of filter classes for room air and dedusting technology".

The edition published in October replaces the previous edition from 2015 and takes into account the current standards situation.

English version published: VDMA guide "Dust extraction systems Fire and explosion protection"

The VDMA guide assists with the selection of protective measures for the safe handling of combustible dusts and explosive dust/air mixtures in dust extraction systems. In addition to the German edition, the guide is now also available in English.

VDMA 24020-1:2019-10 "Operational requirements for refrigeration systems" published in draft version

Recommendations for the safe operation of refrigerating systems with the refrigerant ammonia. Comments possible until December 1th, 2019.

3rd Frankfurt BIM Symposium underlines the importance of Building Information Modelling in building technology

On 7 November, the 3rd BIM Symposium will take place in Frankfurt. Building technology contributions characterize the key function of BIM for integral planning, construction and operation of buildings.

VDMA specification on blasting technology, fire and explosion protection published

Revision to VDMA 24388 completed. Current version published in German and English.

Spanish version of VDMA LABS guide published

The accompanying guide to VDMA 24364 Testing for paint wetting impairment substances (LABS-conformity) is now available as a Spanish online version.

Introductory article on the newly developed EN 16770:2018

Safety of woodworking machines Safety of woodworking machines - Chip and dust extraction systems for indoor installation – Safety requirements

Continued good prospects for Air Handling Technology

Sales increase of 3 percent expected for 2019. Industry with high significance for the world machine trade. Environmental protection, climate protection and occupational safety as business drivers.

Draft VDMA 24177:2019-05 published

The currently valid version 24177:2009-12 of the VDMA specification "Fans for smoke and heat control of buildings in the event of fire" has been extensively revised by the VDMA working group ‘Smoke Extraction’. The draft of the revised version is now available.

HANNOVER MESSE offers surface technology a platform for a strong future

The focus of surface technology is on networked production. From 2020 new exhibition area "Engineered Parts & Solutions" in Hall 19.

VDMA: Network of experts at POWTECH 2019

Exhibiting member companies of the VDMA form a network spanning all halls. VDMA special show informs about current topics of the industry.

VDMA publishes guide on 'Dedusting systems Fire and explosion protection'

The new VDMA guide assists with the selection of protective measures for the safe handling of combustible dusts and explosive dust/air mixtures in dedusting systems.

German Surface Technology consolidates at high level

High capacity utilization of surface technology companies. automotive industry, automotive suppliers and metalworking industry as important target industries.

OPC UA for Surface Technology

Formation of the Joint Working Group of VDMA and OPC Foundation at Hannover Fair 2019

The VDMA-Air Handling Technology Association publishes the Air Technology Information (2019-01) 'Differentiation of process air technology versus ventilation and air conditioning technology'.

The new VDMA Air Technology Information serves to substantiate the term "Process air technology" and to create a differentiation to " Ventilation and air conditioning technology".

POWTECH 2019: VDMA-Special Show „Dust recognizes boundaries - free trade doesn’t“

Free Trade - Industry 4.0 - Future Business. VDMA and member companies offer current topics and innovative exhibits at POWTECH.

Deutsche Messe AG is partner of the VDMA OPC Surface Technology Initiative kick off meeting

Kick-Off-Meeting at Hannover Messe 2019

Hannover Messe 2019: VDMA joint stand for surface technology with focus on digitisation and OPC UA

This year, the focus of VDMA Surface Technology at the joint stand in Hall 5 is clearly on digitisation and OPC UA.

VDMA: Change in the Board of the Air Handling Technology Association

Dr. Bruno Lindl retires after 10 years as board member of the Air Handling Technology Association. Dr. Stephan Arnold has been co-opted by the existing Management Board with immediate effect.

VDMA: The new product directory "Ventilation and air-conditioning systems, units and components" is available online

Now available for download: New manufacturer and supplier directory of the Air Conditioning and Ventilation Technology department in German and English.

VDMA: Brochure "Energy-efficient Refrigeration Technology", Edition 2018 published

Companies of the VDMA working group "Energy-efficient Refrigeration Technology" present solutions for energy-efficient components and systems.

VDMA: New edition of the product directory "Fans for industrial applications" by manufacturers and suppliers

Das neue Hersteller- und Lieferverzeichnis „Ventilatoren für industrielle Anwendungen“ ist ab sofort erhältlich. Es unterstützt Anwender bei der Suche nach dem geeigneten Produkt.

New VDMA air filter information offers valuable assistance in the transition from DIN EN 779 to DIN EN ISO 16890

Since July 2018, the new air filter standard DIN EN ISO 16890 "Air filters for general ventilation" has been in force, replacing DIN EN 779. The current VDMA brochure "Air Filter Information (2018-06)" offers manufacturers, dealers and operators valuable assistance for the transition.

VDMA: Raising threshold values for the energy inspection of Air conditioning and heating systems are not in the sense of environmental protection

The consolidation of legislation to save energy in buildings brings about changes. Not all of them seem to be optimized in terms of environmental protection.

Publication of VDMA Standard Sheet 24247-2: 2018-10: “Energy efficiency of refrigerating systems – Part 2: Requirements for system design and components"

Taking into account the "Regulation (EU) 2015/1095", the VDMA Standard Sheet 24247-2 has been revised and will be published in the new version October 2018.

VDMA Specification 24186-4:2018-05 revised and published

Program of services for the maintenance of technical systems and equipment in buildings - Part 4: Measurement and control equipment and building automation and control systems

Chillventa lecture series "Air Filters" on 18 October 2018 in Hall 9

The latest trends and developments in refrigeration and air conditioning technology are on show at Chillventa in Nuremberg. And it is much more than just a trade fair: The successful industry platform for refrigeration, air conditioning, ventilation and heat pumps is an event by experts for experts.

Lecture series on 17 October 2018 at the 42nd BImSchV as part of Chillventa 2018

If you want to experience the latest developments and trends in refrigeration and air conditioning technology, enter the date of the upcoming Chillventa in your diary today.

High capacity utilization of surface technology machine manufacturers

Among the mechanical engineering sectors, things have been going particularly well for surface technology over the past few years. The industry is booming.

42. BImSchV in Painting Technology

The VDMA flyer "42. BImSchV in der Lackiertechnik" informs which obligations the 42. BImSchV imposes on operators of painting systems.

VDMA Guideline for the Identification of irregular shot blasting machines

Important assistance in the purchase of shot blasting machines. Presentation of the new guide to SurfaceTechnology GERMANY in Stuttgart.

LABS conformity: Specification VDMA 24364 published.

The new VDMA 24364 specification for testing the LABS conformity has been published in May. The accompanying guide on LABS testing will be presented at SurfaceTechnology GERMANY for the first time.

Air-Handling Technology reports very good order situation in the first quarter of 2018

The companies of VDMA Air-Handling Technology Association are optimistic about developments in the current year. In the course of digitisation, specialist staff training is once again gaining in importance.

VDMA: New edition of Air Pollution Control Directory to be published at IFAT 2018

Just in time for the opening of the world's leading trade fair IFAT in Munich, the new edition of the VDMA list of manufacturers and suppliers of components and systems for air pollution control will be published next Monday.

IFAT 2018: Air - elixir of life - Multifaceted air pollution control technology for occupational safety and environmental protection

Mechanical Engineering Industry Association (VDMA) will once again be presenting itself at IFAT 2018 with a joint stand. Together with member companies in the field of air pollution control, it will be represented in Hall A4, Stand No. 216.

VDMA publishes new position paper on the guideline VDI 6022 Part 1

The VDMA Dust Removal Technology working group contradicts the VDI opinion regarding the impact of process air technology systems in the guideline VDI 6022. VDMA position paper specifies the scope of the guideline.

VDMA: Air Handling Technology expects another year of growth in 2018

Very good order situation. The industry expects sales growth of 5 percent for 2018.

Joint stand at IFAT 2018 - Air pollution control is central to occupational safety and environmental protection

At the upcoming IFAT environmental technology trade fair in Munich from 14 to 18 May 2018, the VDMA Air-Handling Technology Association and its members will once again be present with a joint stand.

Publication of VDMA-Specification 24247-6: Air-conditioning cooling Refrigeration in air conditioning systems

The VDMA Specification 24247-6 supports manufacturers in the planning and energy-efficient operation of air-conditioning systems and processes

Eurovent

06.10.2020
Dr. Thomas Caesar (Freudenberg Filtration Technologies) commences second term as group’s Vice-Chairman.
27.08.2019
Association’s position a response to continued lack of meaningful EU regulatory requirements on Indoor Air Quality (IAQ) after recast European Buildings Directive (EPBD).
04.06.2019
Morten Schmelzer, Managing Director of Eurovent, leaves the association.
24.05.2019
Naci Sahin elected president for a second term. New membership structure adopted.
24.04.2019
Comprehensiveness of association’s documents reflects need to redevelop essential parts of the currently applicable Regulations.
Publication contains everything you need to know about the heart of a ventilation system
06.11.2018
Eurovent 4/23 — 2018 includes practical table and updated values.
06.11.2018
During the Eurovent Summit in Seville, members of the Eurovent Product Group "Air Filters" have approved the third edition of amended Recommendation 4/21-2018 "Energy Efficiency Evaluation of Air Filters for General Ventilation Purposes".
With Naci Sahin, Eurovent welcomes its first-ever President from Turkey.
10.07.2018
The Air-Handling Technology Association is a founding member of Eurovent with its main focus on air conditioning and ventilation technology as well as refrigeration technology.
07.06.2018
The Eurovent Summit 2018 will take place from 25-28 September 2018 in Seville, Spain. Further information and the possibility to register can be found here.
16.01.2018
Eurovent Recommendation 4/23 constitutes a comprehensive guideline, which supports a swift transition away from EN 779 while making full use of potential EN ISO 16890 offers in terms of Indoor Air Quality.
16.01.2018
ProKlima, the Swiss association of air conditioning and ventilation manufacturers and suppliers, has formally joined the Eurovent Association on 1 January 2018. With the entry of ProKlima, more than 120 companies have joined Europe’s leading HVACR sector association. A core focus is being put on building ventilation.
123 A B C D E F G H I j k l m n o p q r s t u v w x y z Show All
AAF-Lufttechnik
Odenwaldstr. 4
64646 Heppenheim
Deutschland
E-Mail:
Phone:
sales.germany@aafeurope.com
(+49 6252) 6 99 77-0
Aalberts Surface Treatment
Seelandstr. 7
23569 Lübeck
Deutschland
E-Mail:
Phone:
luebeck@aalberts-st.com
(+49 451) 3 90 06-0
Aerzener Maschinenfabrik
Reherweg 28
31855 Aerzen
Deutschland
E-Mail:
Phone:
info@aerzen.com
(+49 5154) 81-0
Erfurter Str. 17
36251 Bad Hersfeld
Deutschland
E-Mail:
Phone:
info@afotek.de
(+49 6621) 50 76-0
Siemensstr. 42
59199 Bönen
Deutschland
E-Mail:
Phone:
verkauf@afprofilters.com
(+49 2383) 9 19-1 30
AFS Airfilter Systeme
Am Richtbach 14
74547 Untermünkheim
Deutschland
E-Mail:
Phone:
info@afs-airfilter.de
(+49 7944) 91 60-0
Gutenbergstr. 14
48282 Emsdetten
Deutschland
E-Mail:
Phone:
info@agtos.de
(+49 2572) 9 60 26-0
Air Liquide Global E&C Solutions Germany
Olof-Palme-Str. 35
60439 Frankfurt am Main
Deutschland
E-Mail:
Phone:
communication@airliquide.com
(+49 69) 58 08-0
AL-KO THERM
Hauptstr. 248 - 250
89343 Jettingen-Scheppach
Deutschland
E-Mail:
Phone:
absaug.technik@al-ko.de
(+49 8225) 39-24 12
Alfa Laval Mid Europe
Wilhelm-Bergner-Str. 7
21509 Glinde
Deutschland
E-Mail:
Phone:
alfalaval.germany@alfalaval.com
(+49 40) 72 74-03
Dr. Thomas Schräder
Dr. Thomas Schräder
Managing Director Air-Handling Technology, Managing Director Working Group Maintenance Building Technology (AIG), Managing Director Specialized Group Refrigerated Cabinets, Forum Building Technology
(+49 69) 66 03-12 27
(+49 69) 66 03-22 27
Nina Ruth Hofmann
Nina Ruth Hofmann
Assistant
(+49 69) 66 03 - 1443
(+49 69) 66 03 - 2443
Astrid Thieme-Medinger
Astrid Thieme-Medinger
Press- and Public Relations, Trade Fairs
(+49 69) 66 03-12 91
(+49 69) 66 03-22 91
Reiner Eberhardt, former Chairman of the VDMA Surface Technology Division, passed away
Reiner Eberhardt, longtime managing director of Sprimag Spritzmaschinenbau GmbH & Co. KG and Director of REITER BRASIL Ltda as well as former Chairman of the Surface Technology Department of the VDMA passed away on 25.10.2020 in Sao Paulo, Brazil.
BMWi publishes funding guideline "Corona-compatible conversion and upgrade of ventilation and air-conditioning systems
On 19 October 2020, the guideline for federal funding for the conversion and upgrading of stationary Ventilation and air conditioning systems in public buildings and places of assembly was published in order to reduce the risk of infection from potentially virus-laden aerosols through inadequate ventilation in closed rooms.
In the fight against COVID-19: Standards for medical equipment are available free of charge
In order to make it easier for companies to switch production to medical equipment, the relevant standards are currently available free of charge.
Search for members

You can search for specific products or companies directly by entering the search term or within specific trade associations.