18.03.2019

General Assembly 2019- Save the date

The General Meetings of the Air Handling Technology Association and Surface Technology Department will take place on 16-17 May.

Show article

18.03.2019

The VDMA-Air Handling Technology Association publishes the Air Technology Information (2019-01) 'Differentiation of process air technology versus ventilation and air conditioning technology'.

The new VDMA Air Technology Information serves to substantiate the term "Process air technology" and to create a differentiation to " Ventilation and air conditioning technology".

Show article

05.03.2019

LTG Aktiengesellschaft: Increased Sales

Fiscal 2018 was an extremely dynamic year for LTG Aktiengesellschaft, Stuttgart: with sales of 30 million euros for the Group as a whole, the experts for room air and process air technology exceeded the previous year's figure by more than 5 %.

Show article

05.03.2019

Award for Keller Lufttechnik

On 22 February 2019, former Minister of Economic Affairs Wolfgang Clement in Berlin awarded Keller Lufttechnik GmbH Co. KG the Top Job Seal for outstanding employer qualities. The award, presented by the Center for Employer Attractiveness, zeag GmbH, and the University of St. Gallen, is only given to companies that have had their qualities as employers checked. The motivation for the participation of the companies is the knowledge that employee satisfaction and employer attractiveness are more than ever decisive for success.

Show article

24.08.2018

Sales growth in 2017 for industrial process cooling systems

The current sales statistics for industrial process cooling plants provide rising domestic sales for 2017 and foreign sales that will almost reach the level of 2015 again. The statistics are published by the Air-Handling Technology Association of the Mechanical Engineering Industry Association (VDMA).

Show article

01.03.2019

RadioDuct - A research and pilot project

Radio-controlled air-conditioning technology for energy-efficient buildings

Show article

28.02.2019

POWTECH 2019: VDMA-Special Show „Dust recognizes boundaries - free trade doesn’t“

Free Trade - Industry 4.0 - Future Business. VDMA and member companies offer current topics and innovative exhibits at POWTECH.

Show article

15.02.2019

Deutsche Messe AG is partner of the VDMA OPC Surface Technology Initiative kick off meeting

Kick-Off-Meeting at Hannover Messe 2019

Show article

15.02.2019

Hannover Messe 2019: VDMA joint stand for surface technology with focus on digitisation and OPC UA

This year, the focus of VDMA Surface Technology at the joint stand in Hall 5 is clearly on digitisation and OPC UA.

Show article

11.02.2019

VDMA 24148:2018-10 "Minimum requirements for a technical data sheet for refrigerated display cabinets" - Vote on the final version

Objection meeting took place on January 21, 2019. Currently the final version is being prepared. Publication of specification expected at the end of March.

Show article

06.02.2019

KEMPER grows: 2018 most successful year in the company's history

KEMPER generates sales of more than 40 million euros. Sales increase by 13 percent compared to 2017. Digitization of the portfolio continues to be the main focus.

Show article

31.01.2019

ULT AG: A quarter of a century under the sign of environmental air technology

What began on 25 January 1994 is now a real success story. At that time Dr. Christian Jakschik founded ULT Umwelt-Lufttechnik, which after 25 years has not only successfully established itself on the market, but has also developed into a globally active supplier of ventilation systems with more than 130 employees.

Show article

11.06.2018

Your contact persons

Below is a list of all contact persons of the Air-Handling Technology Association and it's sector departments.

Show article

20.10.2017

Portrait of the Air-Handling Technology Association

Manufacturers from five established specialist sectors are organised in the VDMA Air-Handling Technology Association.

Show article

10.12.2018

VDMA: Change in the Board of the Air Handling Technology Association

Dr. Bruno Lindl retires after 10 years as board member of the Air Handling Technology Association. Dr. Stephan Arnold has been co-opted by the existing Management Board with immediate effect.

Show article

09.12.2018

VDMA: Change in the Board of the Air Handling Technology Association

Dr. Bruno Lindl retires after 10 years as board member of the Air Handling Technology Association. Dr. Stephan Arnold has been co-opted by the existing Management Board with immediate effect.

Show article

14.01.2019

planen-bauen 4.0: Current Supervisory Board

New Supervisory Board plan-build 4.0 since October 2018. A total of eleven representatives elected at shareholders' meeting.

Show article

14.01.2019

Digitisation brings the players together in construction projects

With Building Information Modeling (BIM), digitization is advancing in the construction industry. An initial joint meeting of the BIM clusters Hesse and Rhineland-Palatinate at VDMA has shown how all players can complement each other through networking and thus make structures more plannable, safer and more cost-effective in later operations.

Show article

14.01.2019

LTG Aktiengesellschaft expands sales network in USA and Canada

LTG intensifies indoor air activities in the USA and Canada. Induction units and fan convectors are the main sales areas.

Show article

14.12.2018

Introductory article on the newly developed EN 16770:2018

Safety of woodworking machines Safety of woodworking machines - Chip and dust extraction systems for indoor installation – Safety requirements

Show article
General Assembly 2019- Save the date
The VDMA-Air Handling Technology Association publishes the...
LTG Aktiengesellschaft: Increased Sales
Award for Keller Lufttechnik
Sales growth in 2017 for industrial process cooling systems
RadioDuct - A research and pilot project
POWTECH 2019: VDMA-Special Show „Dust recognizes boundarie...
Deutsche Messe AG is partner of the VDMA OPC Surface Techn...
Hannover Messe 2019: VDMA joint stand for surface technolo...
VDMA 24148:2018-10 "Minimum requirements for a techni...
KEMPER grows: 2018 most successful year in the company...
ULT AG: A quarter of a century under the sign of environme...
Your contact persons
Portrait of the Air-Handling Technology Association
VDMA: Change in the Board of the Air Handling Technology A...
VDMA: Change in the Board of the Air Handling Technology A...
planen-bauen 4.0: Current Supervisory Board
Digitisation brings the players together in construction p...
LTG Aktiengesellschaft expands sales network in USA and Ca...
Introductory article on the newly developed EN 16770:2018

General Assembly 2019- Save the date

18.03.2019 The General Meetings of the Air Handling Technology Association and Surface Technology Department will take place on 16-17 May.

Show article

The VDMA-Air Handling Technology Association publishes the Air Technology Information (2019-01) 'Differentiation of process air technology versus ventilation and air conditioning technology'.

18.03.2019 The new VDMA Air Technology Information serves to substantiate the term "Process air technology" and to create a differentiation to " Ventilation and air conditioning technology".

Show article

LTG Aktiengesellschaft: Increased Sales

05.03.2019 Fiscal 2018 was an extremely dynamic year for LTG Aktiengesellschaft, Stuttgart: with sales of 30 million euros for the Group as a whole, the experts for room air and process air technology exceeded the previous year's figure by more than 5 %.

Show article

Award for Keller Lufttechnik

05.03.2019 On 22 February 2019, former Minister of Economic Affairs Wolfgang Clement in Berlin awarded Keller Lufttechnik GmbH Co. KG the Top Job Seal for outstanding employer qualities. The award, presented by the Center for Employer Attractiveness, zeag GmbH, and the University of St. Gallen, is only given to companies that have had their qualities as employers checked. The motivation for the participation of the companies is the knowledge that employee satisfaction and employer attractiveness are more than ever decisive for success.

Show article

Sales growth in 2017 for industrial process cooling systems

24.08.2018 The current sales statistics for industrial process cooling plants provide rising domestic sales for 2017 and foreign sales that will almost reach the level of 2015 again. The statistics are published by the Air-Handling Technology Association of the Mechanical Engineering Industry Association (VDMA).

Show article

RadioDuct - A research and pilot project

01.03.2019 Radio-controlled air-conditioning technology for energy-efficient buildings

Show article

POWTECH 2019: VDMA-Special Show „Dust recognizes boundaries - free trade doesn’t“

28.02.2019 Free Trade - Industry 4.0 - Future Business. VDMA and member companies offer current topics and innovative exhibits at POWTECH.

Show article

Deutsche Messe AG is partner of the VDMA OPC Surface Technology Initiative kick off meeting

15.02.2019 Kick-Off-Meeting at Hannover Messe 2019

Show article

Hannover Messe 2019: VDMA joint stand for surface technology with focus on digitisation and OPC UA

15.02.2019 This year, the focus of VDMA Surface Technology at the joint stand in Hall 5 is clearly on digitisation and OPC UA.

Show article

VDMA 24148:2018-10 "Minimum requirements for a technical data sheet for refrigerated display cabinets" - Vote on the final version

11.02.2019 Objection meeting took place on January 21, 2019. Currently the final version is being prepared. Publication of specification expected at the end of March.

Show article

KEMPER grows: 2018 most successful year in the company's history

06.02.2019 KEMPER generates sales of more than 40 million euros. Sales increase by 13 percent compared to 2017. Digitization of the portfolio continues to be the main focus.

Show article

ULT AG: A quarter of a century under the sign of environmental air technology

31.01.2019 What began on 25 January 1994 is now a real success story. At that time Dr. Christian Jakschik founded ULT Umwelt-Lufttechnik, which after 25 years has not only successfully established itself on the market, but has also developed into a globally active supplier of ventilation systems with more than 130 employees.

Show article

Your contact persons

11.06.2018 Below is a list of all contact persons of the Air-Handling Technology Association and it's sector departments.

Show article

Portrait of the Air-Handling Technology Association

Manufacturers from five established specialist sectors are organised in the VDMA Air-Handling Technology Association.

Show article

VDMA: Change in the Board of the Air Handling Technology Association

Dr. Bruno Lindl retires after 10 years as board member of the Air Handling Technology Association. Dr. Stephan Arnold has been co-opted by the existing Management Board with immediate effect.

Show article

VDMA: Change in the Board of the Air Handling Technology Association

09.12.2018 Dr. Bruno Lindl retires after 10 years as board member of the Air Handling Technology Association. Dr. Stephan Arnold has been co-opted by the existing Management Board with immediate effect.

Show article

planen-bauen 4.0: Current Supervisory Board

New Supervisory Board plan-build 4.0 since October 2018. A total of eleven representatives elected at shareholders' meeting.

Show article

Digitisation brings the players together in construction projects

With Building Information Modeling (BIM), digitization is advancing in the construction industry. An initial joint meeting of the BIM clusters Hesse and Rhineland-Palatinate at VDMA has shown how all players can complement each other through networking and thus make structures more plannable, safer and more cost-effective in later operations.

Show article

LTG Aktiengesellschaft expands sales network in USA and Canada

14.01.2019 LTG intensifies indoor air activities in the USA and Canada. Induction units and fan convectors are the main sales areas.

Show article

Introductory article on the newly developed EN 16770:2018

14.12.2018 Safety of woodworking machines Safety of woodworking machines - Chip and dust extraction systems for indoor installation – Safety requirements

Show article
General Assembly 2019- Save the date
The VDMA-Air Handling Technology Association publishes the Air Technology Information (2019-01) 'Differentiation of process air technology versus ventilation and air conditioning technology'.
LTG Aktiengesellschaft: Increased Sales
Award for Keller Lufttechnik
Sales growth in 2017 for industrial process cooling systems
RadioDuct - A research and pilot project
POWTECH 2019: VDMA-Special Show „Dust recognizes boundaries - free trade doesn’t“
(09.- 11.04.2019) VDMA-Sonderschau zur POWTECH 2019 - mit Exponatenausstellung
Deutsche Messe AG is partner of the VDMA OPC Surface Technology Initiative kick off meeting
Hannover Messe 2019: VDMA joint stand for surface technology with focus on digitisation and OPC UA
VDMA 24148:2018-10 "Minimum requirements for a technical data sheet for refrigerated display cabinets" - Vote on the final version
Drying Technology
KEMPER grows: 2018 most successful year in the company's history
ULT AG: A quarter of a century under the sign of environmental air technology
Your contact persons
Portrait of the Air-Handling Technology Association
VDMA: Change in the Board of the Air Handling Technology Association
VDMA: Change in the Board of the Air Handling Technology Association
planen-bauen 4.0: Current Supervisory Board
Digitisation brings the players together in construction projects